GelMA , 30% Methacrylation, 2280018-77-9, IC-131130
Product Introduction
GelMA (Gelatin Methacryloyl), 30% methacrylation, is a derivative prepared by reacting methacrylic anhydride (MA) with gelatin. The methacrylation degree is 30 ¡À 5% (amino group substitution). GelMA exhibits excellent biocompatibility, biodegradability, and moldability. It can be photocrosslinked into hydrogels and is widely used in tissue regeneration research for skin, tendon, bone, cartilage, blood vessels, and the cardiovascular system. GelMA hydrogels are also used in drug delivery, organ-on-a-chip, and biosensing research.
Product Features
1. Photocrosslinkable: Can be crosslinked into hydrogels under light exposure for 3D culture and tissue engineering.
2. Excellent Biocompatibility: Derived from gelatin, supporting cell adhesion and proliferation.
3. Biodegradable and Moldable: Suitable for various tissue regeneration and drug delivery applications.
4. Defined Methacrylation Degree: 30 ¡À 5% amino group substitution for reproducible hydrogel properties.
5. Broad Application: Suitable for tissue engineering, drug delivery, organ-on-a-chip, and biosensing research.
Specifications
Size: 10 mg / 100 mg / 1 g / 5 g
CAS Number: 2280018-77-9
Methacrylation Degree (Amino Group Substitution): 30 ¡À 5%
Appearance: Solid
Color: White to off-white
Storage and Stability
Shipping Conditions: Room temperature in continental US; may vary elsewhere.
Storage Conditions: Store at -20¡ãC, protected from light. For solutions: store at -80¡ãC for 6 months or at -20¡ãC for 1 month (protected from light).
Shelf Life: The product is stable for 24 months from the date of manufacture when stored as directed.
Protocol (For Reference Only)
Important: Protect from light during handling and storage. Prepare solutions fresh before use.
1. Stock Solution Preparation: Dissolve GelMA in warm PBS or culture medium (e.g., 37-50¡ãC) to the desired concentration (typically 5-20% w/v). Add a photoinitiator (e.g., LAP or Irgacure 2959) according to the manufacturer''''s instructions. Filter sterilize if required for cell culture.
2. Hydrogel Formation: Pipette the GelMA solution into the desired mold or culture vessel. Expose to UV or visible light at the appropriate wavelength and intensity for the selected photoinitiator to induce crosslinking (e.g., 365 nm UV or 405 nm visible light, 1-5 minutes).
3. Cell Encapsulation (Optional): Mix cells into the GelMA solution before crosslinking for 3D cell encapsulation. Maintain the solution at 37¡ãC during mixing to prevent premature gelation.
4. Culture and Analysis: Culture the crosslinked hydrogel constructs under standard conditions and analyze according to the specific application.
Precautions
1. Protect from light during handling and storage.
2. Prepare solutions fresh and maintain at 37¡ãC to prevent premature gelation before crosslinking.
3. The methacrylation degree may affect mechanical properties and crosslinking density; optimize concentration and crosslinking conditions for specific applications.
4. For research use only. Not for use in diagnostic or therapeutic procedures.
FAQ (Simplified)
Q1: What is the methacrylation degree of this product?
A1: The methacrylation degree is 30 ¡À 5% (amino group substitution).
Q2: How is GelMA crosslinked into a hydrogel?
A2: GelMA is crosslinked using a photoinitiator (e.g., LAP or Irgacure 2959) under UV or visible light exposure.
Q3: What applications is GelMA suitable for?
A3: GelMA is suitable for tissue regeneration research (skin, tendon, bone, cartilage, blood vessels, cardiovascular system), drug delivery, organ-on-a-chip, and biosensing.
Q4: How should I store this product?
A4: Store at -20¡ãC protected from light. For solutions, store at -80¡ãC for 6 months or at -20¡ãC for 1 month protected from light.
Disclaimer
1. For Research Use Only. Not for use in diagnostic or therapeutic procedures.
2. Due to the variable nature of biological research, optimization of hydrogel concentration and crosslinking conditions is recommended for specific applications.
3. This warranty is limited to the replacement of the product. The manufacturer assumes no liability for incidental or consequential damages.
4. Wear appropriate protective clothing and gloves when handling this product.
Ordering Information
Catalog Number: IC-131130
Product Name: GelMA (Gelatin Methacryloyl), 30% Methacrylation
Size: 10 mg / 100 mg / 1 g / 5 g
Suggested Retail Price:
10 mg: CNY ¥500.00 / USD $50.00 / EUR €60.00 / JPY ¥9000.00
100 mg: CNY ¥2600.00 / USD $260.00 / EUR €312.00 / JPY ¥46800.00
1 g: CNY ¥3500.00 / USD $350.00 / EUR €420.00 / JPY ¥63000.00
5 g: CNY ¥9500.00 / USD $950.00 / EUR €1140.00 / JPY ¥171000.00
Note: The specific price is subject to the transaction price in the offline contract. This document is provided for technical reference only and does not constitute any form of sales advertisement or invitation to offer. For product details and purchase inquiries, please contact local sales representatives.


